Model Calculation of Cross Rolling Textures

Rolling textures of a Cu-20% Nb composite

Heavily rolled in-situ MMCs of Cu-20 vol% Nb have been investigated by means of quantitative texture analysis mainly for three reasons. First, the crystallographic texture can be very sensitive to the deformation process. Second, the orientation distribution affects the strength of the material in terms of the Taylor factor. Third, the influence of a massive second phase on texture development ...

Quantitative comparison between simulated and experimental FCC rolling textures

Rolling Shear Properties of Cross Laminated

1 College of Materials Science and Engineering, Nanjing Forestry University, 159 6 Longpan Road, Nanjing, Jiangsu, China 210037. 7 2 Faculty of Forestry and Environmental Management, University of New 8 Brunswick, 28 Dineen Drive, Fredericton, New Brunswick, Canada E3B 5A3. 9 * Corresponding author: [email protected] 10 Received: July 08, 2017 11 Accepted: March 02, 2018 12 Posted online: March 06...

Probability Analysys for Rolling Rolls Calculation as per Probabilistic Method

Two calculation methods are mainly implemented during the construction as well as modeling of the rolling rolls. These are: deterministic (classical) and probabilistic – calculation based on reliability. When using deterministic method, starting point considers that the workloads as well as material specifications are invariable values. However, in reality, rolling rolls are burdened with varia...

Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force

Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...