MODEL OF LOAD-DEFORMATION RELATIONS FOR H-SHAPED STEEL BEAMS UNDER MONOTONIC LOADING
نویسندگان
چکیده
منابع مشابه
Mathematical Modeling of Column-Base Connections under Monotonic Loading
Some considerable damage to steel structures during the Hyogo-ken Nanbu Earthquake occurred. Among them, many exposed-type column bases failed in several consistent patterns, such as brittle base plate fracture, excessive bolt elongation, unexpected early bolt failure, and inferior construction work, etc. The lessons from these phenomena led to the need for improved understanding of column base...
متن کاملStructural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading
This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...
متن کاملMartensitic Transformation in Ultrafine-Grained Stainless Steel AISI 304L Under Monotonic and Cyclic Loading
The monotonic and cyclic deformation behavior of ultrafine-grained metastable austenitic steel AISI 304L, produced by severe plastic deformation, was investigated. Under monotonic loading, the martensitic phase transformation in the ultrafine-grained state is strongly favored. Under cyclic loading, the martensitic transformation behavior is similar to the coarse-grained condition, but the cycli...
متن کاملFinite Element Modeling of Deformation Behavior of Steel Specimens under Various Loading Scenarios
Lightweighting materials (e.g., advanced high strength steels, aluminum alloys etc.) are increasingly being used by automotive companies as sheet metal components. However, accurate material models are needed for wider adoption. These constitutive material data are often developed by applying biaxial strain paths with cross-shaped (cruciform) specimens. Optimizing the design of specimens is a m...
متن کاملDynamic Plastic Deformation of Deepwater Steel Catenary Risers Under Extreme Cyclic Compressive Loading
This paper (SPE 173892) was revised for publication from paper OTC 25335, first presented at the Offshore Technology Conference, Houston, 5–8 May 2014. Original manuscript received for review 20 June 2014. Revised manuscript received for review 27 October 2014. Paper peer approved 4 November 2014. Summary Steel catenary risers (SCRs) on a large-heave-motion vessel are susceptible to compression...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2016
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.81.123