Model Predictive Control For Direct Steam Generation in Paraboloidal Dishes
نویسندگان
چکیده
منابع مشابه
DIRECT STEAM GENERATION USING THE SG4 500m PARABOLOIDAL DISH CONCENTRATOR
The ANU 500 m dish is the first prototype of a new design geared towards mass production and low levelised cost of energy. The dish has high quality optics, with a geometric concentration ratio above 2200, and can be used for a variety of energy conversion technologies. The SG4 concentrator is currently being operated in direct steam generation mode with a monotube steam receiver. Experimental ...
متن کاملDirect Model-Predictive Control
Due to simplicity and convenience, Model Predictive Control, which consists in optimizing future decisions based on a pessimistic deterministic forecast of the random processes, is one of the main tools for stochastic control. Yet, it suffers from a large computation time, unless the tactical horizon (i.e. the number of future time steps included in the optimization) is strongly reduced, and la...
متن کاملBuffer storage for direct steam generation
Fast reaction times and high discharge rates make steam accumulators a promising option for compensation of fast transients in insolation for solarthermal systems using steam as working medium. Using the volume of components like separator drums or heat exchangers for storage of pressurized hot water is a cost-effective approach to integrate buffer storage capacity. While the basic steam accumu...
متن کاملDirect Steam Generation with Dish Concentrators
This paper presents current research on Direct Steam Generation (DSG) by the Solar Thermal Group at ANU. It includes ongoing work on a transient model for a dish steam cavity receiver that is suitable for model-based control of DSG as well as reporting on the experimental set-up on a new 500m paraboloidal dish solar concentrator. A comparison of two transient models of a dish steam cavity recei...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2018
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2018.04.010