MODELING & DESIGNING OF A SOLAR FURNACE FOR CURING GEOPOLYMER BRICKS
نویسندگان
چکیده
منابع مشابه
Influence Of Curing Conditions on Geopolymer Leaching
The worldwide production of PCC fly ash is estimated at achieving 800 million tonnes per year in 2010 [1]. European Union regulations aim at developing new technologies focused on the recycling of these large amounts of PCC fly ash into added-value products. The synthesis of geopolymer binders may be a successful alternative, giving rise to low-cost and environmentally friendly materials with c...
متن کاملMechanical Behaviour of Geopolymer Concrete under Ambient Curing
Utilisation of fly ash and Ground Granulated Blast Slag as an alternative material in concrete reduces the use of OPC in concrete. Evolution of geopolymer concrete cured at ambient temperature broadens its suitability and applicability to concrete based structures. This paper presents the mix proportions and outcome of an experimental study on the density and compressive strength of geopolymer ...
متن کاملDynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...
متن کاملModeling and Simulation of a Side-Port Regenerative Glass Furnace
ABSTRACT:A mathematical model for the performance prediction of an industrial glass furnace with six ports on each side was developed. This model comprises of two main sub-models for the combustion chamber and glass-melting tank. The first sub-model consists of the models for the combustion and the heat transfer model including, radiation, convection and conduction. The fuel combustion in a...
متن کاملOptimization of thermal curing cycle for a large epoxy model
Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Misr journal of agricultural engineering
سال: 2023
ISSN: ['1687-384X', '2636-3062']
DOI: https://doi.org/10.21608/mjae.2023.211436.1100