Modeling and Analysis of Exhaust Manifold using CFD
نویسندگان
چکیده
منابع مشابه
Experimental and finite element vibrational analysis of exhaust manifold heat shield
Most of internal combustion engines have one or two heat shields that have been installed on the exhaust manifold to avoid the heat transfer to upper parts of the engine such as the valve cover. In some engines, this part fails due to the fracture and causes engine noise and other failures in the engine. In this paper, the failure of a heat shield due to vibrational loads of the engine has been...
متن کاملscour modeling piles of kambuzia industrial city bridge using hec-ras and artificial neural network
today, scouring is one of the important topics in the river and coastal engineering so that the most destruction in the bridges is occurred due to this phenomenon. whereas the bridges are assumed as the most important connecting structures in the communications roads in the country and their importance is doubled while floodwater, thus exact design and maintenance thereof is very crucial. f...
Thermomechanical Analysis of Exhaust Manifold and Catalyst for with Fluid Structure Interaction
Design of exhaust manifold is important due to its effects on performance of catalyst, thermal and thermo- mechanical loads. In this paper, first transient analysis of fluid was carried out with FLUENT software, then time-average temperature and heat transfer coefficient contour for three cycle were mapped on inner surface of exhaust manifold with MATLAB software for thermomechanical analysis. ...
متن کاملCFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces
This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated...
متن کاملAnalysis of Air Supply Type and Exhaust Location in Laboratory Animal Research Facilities Using CFD
The results from a computational fluid dynamics (CFD) study on the effect of air supply diffuser type and exhaust location in a typical animal research laboratory are presented. The results show that low-level exhausts produce higher temperatures in the room and cages, but the best in-cage ventilation (lowest CO 2 concentrations) compared with ceiling or high-level exhausts. Further, the study ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/455/1/012132