MODELING AND MEASUREMENT SYSTEM FOR MAGNETIC FIELD DISTRIBUTIONS IN BIOLOGICAL STRUCTURES
نویسندگان
چکیده
منابع مشابه
Modeling Magnetic Field in Heavy ion Collisions Using Two Different Nuclear Charge Density Distributions
By studying the properties of matter during heavy-ion collisions, a better understanding of the Quark-Gluon plasma is possible. One of the main areas of this study is the calculation of the magnetic field, particularly how the values of conductivity affects this field and how the field strength changes with proper time. In matching the theoretical calculations with results obtained in lab, two diffe...
متن کاملMeasurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Designated magnetic field design for magnetic drug guidance in BNCT
In this paper, a local magnetic field was designed and simulated using a Helmholtz coil along with a ferromagnetic core with an appropriate geometric Structure to concentrate a magnetic flux. This field can be used for magnetic guiding of Boron-borne drugs in BNCT.
متن کاملFabrication of New 3D Phantom for the measurement of Geometric Distortion in Magnetic Resonance Imaging System
Introduction: Geometric distortion, an important parameter in neurology and oncology. The current study aimed to design and construct a new three-dimensional (3D) phantom using a 3D printer in order to measure geometric distortion and its 3D reproducibility. Material and Methods: In this study, a new phantom ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Smart Sensing and Intelligent Systems
سال: 2009
ISSN: 1178-5608
DOI: 10.21307/ijssis-2017-350