Modeling and Optimization of Laser Polishing Process
نویسندگان
چکیده
منابع مشابه
Modeling and Optimization of Laser Polishing Process
Laser polishing is a finishing process based on melting material, with the objective of improving surface topography. Some operating parameters must be taken into consideration, such as laser power, feed rate, offset, and overlapping. Moreover, because of its dependence on the primary process, the initial topography has also an impact on the final result. This study describes a quadratic model,...
متن کاملProcess modeling for robotic polishing
This paper presents the solutions adopted for a robotic polishing cell for mold manufacturing. Mold finishing is frequently carried out manually; these kinds of operations are iterative, time consuming and require experience. Automation can introduce cost reduction minimizing production times on such manual finishing operations. The research shown in this paper provides an overall solution with...
متن کاملOptimization of a mainstream nitritation-denitritation process and anammox polishing.
This paper deals with an almost 1-year long pilot study of a nitritation-denitritation process that was followed by anammox polishing. The pilot plant treated real municipal wastewater at ambient temperatures. The effluent of high-rate activated sludge process (hydraulic retention time, HRT=30 min, solids retention time=0.25 d) was fed to the pilot plant described in this paper, where a constan...
متن کامل11.3 Polishing with Laser Radiation
The surface roughness of a part or product strongly influences its properties and functions. Among these can be counted abrasion and corrosion resistance, tribological properties, optical properties, haptics as well as the visual impression the customer desires. Therefore, in industrial manufacturing grinding and polishing techniques are widely used to reduce the roughness of surfaces. A new me...
متن کاملModeling of Polishing Mechanism in Magnetic Abrasive Polishing
Magnetic Abrasive Polishing (MAP) is a super-finishing process primarily used for polishing of nonmagnetic and hard materials like, ceramics and stainless steel. This paper deals with the detailed parametric study in polishing of stainless steel work surface. Statistically designed experiments based on Taguchi methods show that size-ratio, tool-work surface clearance, polishing speed, magnetic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mechanics and Materials
سال: 2014
ISSN: 1662-7482
DOI: 10.4028/www.scientific.net/amm.575.766