Modeling and Simulation for Micromilling Mechanisms
نویسندگان
چکیده
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
MICROMILLING TECHNOLOGY: Global review
Courtesy of the Doctoral Thesis of Endika Gandarias: " MICROM: A revolutionary monitoring system to detect tool breakages & collisions, enhance machine cycles and introduce a new probing concept in micromilling " .
متن کاملSimulation of Oil Reservoirs Driving Indices and Recovery Mechanisms
Different recovery mechanisms are activated during the production from reservoirs. Wells sometimes are kept with the injection. Therefore the evaluation of injection indices depended on material injection, seems to be necessary. This study is going to determine the drive indices for a reservoir by making a model using Eclipse. The model consists a gas cap and aquifer, in which there is an injec...
متن کاملMicromilling of microbarbs for medical implants
Successful application of many implantable medical devices often depends on the technique used for attaching the devices to living tissue. Although mechanical attachment techniques that use micro-scale piercing elements are very promising, the fabrication of the micro-scale piercing elements poses considerable challenges. In this paper, the use of the mechanical micromilling process for fabrica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.01.219