Modeling microstructure evolution in shape memory alloy rods via Legendre wavelets collocation method
نویسندگان
چکیده
منابع مشابه
Microstructure and precipitates in annealed Co38Ni33Al29 ferromagnetic shape memory alloy
Transmission electron microscopy was performed to investigate the microstructure and precipitates in the annealed Co38Ni33Al29 ferromagnetic shape memory alloy. Apart from the dendritic secondary phase in the austenite matrix, micron-sized (up to 100 lm) fcc-based precipitates with partial c0 L12 ordering and containing none, one or three {111}p parallel twin planes were found. The orientation ...
متن کاملMicrostructure Evolution of On-substrate NiTi Shape Memory Alloy Thin Films
When deposited at room temperature, sputtered NiTi thin films are amorphous and need to be crystallized before they can be used as a functional material. We present the results of an annealing study on substrate-constrained NiTi shape memory thin films. Amorphous films of a NiTi shape memory alloy were deposited by UHV sputtering. Films of thickness 1.0 μm were grown on (100) Si wafers both wit...
متن کاملOptimal Control of Volterra Integro-Differential Systems Based On Legendre Wavelets and Collocation Method
problem (OCP) for systems governed by Volterra integro-differential (VID) equation is considered. The method is developed by means of the Legendre wavelet approximation and collocation method. The properties of Legendre wavelet together with Gaussian integration method are utilized to reduce the problem to the solution of nonlinear programming one. Some numerical examples are given to confirm t...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2019
ISSN: 0022-2461,1573-4803
DOI: 10.1007/s10853-019-03927-5