Modeling of chatter vibrations in gun drilling process
نویسندگان
چکیده
منابع مشابه
Simulation of Active Control of Chatter Vibrations
. This paper outlines a strategy for the active control of the self-excited vibration of machine tools which arises when metal is turned, ground or milled. The requisite sensor and actuators for successful operation of such a scheme are outlined. Examples of the results of typical sensors are illustrated in a brief review of previous work. A simple single degree of freedom model of chatter is s...
متن کاملActive Control of Chatter Vibrations in a Turning Process Using an Adaptive Fxlms Algorithm
In this paper a 2-DOF lumped mass model is used for dynamic modelling of a turning process. The cutting forces are modelled using predictive machining theory based on the Merchant cutting force model. Cutting parameters such as shear angle are calculated using experimental relations. Variation of cutting angles is also considered. Regarding the governing delayed differential equations, the mode...
متن کاملOptimization of cold rolling process parameters in order to increasing rolling speed limited by chatter vibrations
Chatter has been recognized as major restriction for the increase in productivity of cold rolling processes, limiting the rolling speed for thin steel strips. It is shown that chatter has close relation with rolling conditions. So the main aim of this paper is to attain the optimum set points of rolling to achieve maximum rolling speed, preventing chatter to occur. Two combination methods were ...
متن کاملTemperature in bone drilling process: Mathematical modeling and Optimization of effective parameters (TECHNICAL NOTE)
Bone drilling process is the most prominent process in orthopedically surgeries and curing bone breakages. It is also very common in dentistry and bone sampling operations. Due to complexity of the material that is machined, bone, and the sensitivity of the process, bone drilling is one of the most important, common and sensitive processes in biomedical engineering field. The most critical prob...
متن کاملThermo-Mechanical Finite Element Modeling of the Friction Drilling Process
Friction drilling uses a rotating conical tool to penetrate the workpiece and create a bushing in a single step without generating chips. This research investigates the threedimensional (3D) finite element modeling (FEM) of large plastic strain and hightemperature work-material deformation in friction drilling. The explicit FEM code with temperature-dependent mechanical and thermal properties, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vibroengineering PROCEDIA
سال: 2021
ISSN: 2345-0533,2538-8479
DOI: 10.21595/vp.2021.22084