Modeling of flash sintering of ionic ceramics
نویسندگان
چکیده
منابع مشابه
On the Mechanism of Microwave Flash Sintering of Ceramics
The results of a study of ultra-rapid (flash) sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10-500 W/cm³) are presented. Ceramic samples of various compositions-Al₂O₃; Y₂O₃; MgAl₂O₄; and Yb(LaO)₂O₃-were sintered using a 24 GHz gyrotron system to a density above 0.98-0.99 of the theoretical value in 0.5-5 min without isothermal...
متن کاملSintering of Ceramics
Sintering with low frequency rf power (-50 M H z ) is a new technique with unique capabilities that has been used to sinter a variety of ceramic materials, including zirconia-toughened alumina, alumina, silicon carbide, and boron carbide. Processing with low frequencies offers many advantages compared to processing with conventional microwave frequencies (915 MHz and 2.45 GHz). Because of the l...
متن کاملDirect Laser Sintering of Ceramics
For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...
متن کاملMicrowave Sintering of Thermistor Ceramics
Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, ...
متن کامل8YSZ sintering by flash sintering method and evaluation of process parameters
Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Bulletin
سال: 2021
ISSN: 0883-7694,1938-1425
DOI: 10.1557/s43577-020-00012-0