Modeling of Microstructure and Mechanical Properties of Heat Treated ZE41-Ca-Sr Alloys for Integrated Computing Platform
نویسندگان
چکیده
The main objective of this study is to present a methodology model the microstructure and mechanical properties ZE41-xCa-ySr alloys for integrated optimization calculation heat treatment process gearbox casting. Firstly, models (0 ≤ x 2, 0 y 0.2) are developed using an artificial neural network (ANN) multivariate regression. dataset ANN regression generated by investigating microstructures alloys. inputs Ca Sr contents, aging temperature time. outputs grain size, ultimate tensile strength, elongation microhardness. optimal obtained testing performance different architectures. In addition, have been built based on Least Squares method. Secondly, SiPESC software, Integrated Computing Platform constructed combining scripting language with command line operation simulation realizing “process—microstructure—property” calculation. Finally, model, batch called MATLAB achieves property prediction. optimum ZE41-0.17Ca-0.2Sr alloy 322 °C, corresponding time 11 h. Furthermore, optimized results validated suggesting that predicted in good agreement results. As consequence, work provides new strategy research development Mg alloys, contributing acceleration magnesium
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولmodification of nanoclay for improving the physico-mechanical properties of dental adhesives
هدف اصلی این مطالعه تهیه یک سامانه نوین چسب عاجی دندانی بر پایه نانورس پیوند شده با پلی متاکریلیک اسید، نانورس پیوند شده با پلی اکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی متاکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی اکریلیک اسید و نانورس پیوند شده با کیتوسان اصلاح شده با گلایسیدیل متاکریلات است. پیوند پلی متاکریلیک اسید و پلی اکریلیک اسید بر ری سطح نانورس در حضور و ...
Modeling of Microstructure and Mechanical Properties of Aluminum Alloys during the Casting and Heat Treatment Process
In the production of aluminum castings, alloy composition, metallurgy, and local solidification conditions determine the distribution of microstructure and defects. The local distributions of microstructure and defects have a defining impact on the mechanical properties. This paper will present an overview of new options to simulate the local microstructure in casting processes and throughout t...
متن کاملThe Effect of Bi-Sr and Ca-Sr Interactions on the Microstructure and Tensile Properties of Al-Si-Based Alloys
The effect of bismuth and calcium additions on the microstructural characteristics and the tensile properties of the modified and grain-refined Al-Si based B319 alloys were studied in this paper. Based on the results obtained, it has been concluded that Bi reacts with both Sr and Mg, leading to severe demodification of the eutectic Si at Bi levels of 0.15%-0.6% Bi. Bismuth causes a decrease of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2022
ISSN: ['2073-4352']
DOI: https://doi.org/10.3390/cryst12091237