MODELING OF NIOBIUM DISSOLUTION PROCESS IN IRON AT ELECTRIC ARC WELDING

Modelling of Electrode-arc Coupling in Electric Arc Welding

Modelling of the arc in electric arc welding is significant to achieve a better process understanding, thus gain better weld quality and a more efficient production process. It requires knowing the conditions at the surfaces of the anode and cathode. These conditions are very difficult to set from measurements and should be calculated. This requires modelling the complex physics of the electrod...

Modeling and control of quasi-keyhole arc welding process

Quasi-keyhole is a novel approach proposed to operate the keyhole arc welding process. Because the method’s effectiveness depends on the amperage of the peak current used to establish the keyhole, this paper proposes adjusting the amperage based on the duration of the peak current, which equals the keyhole establishment time. A nominal model structure has been selected from those identified usi...

Modeling and Control of Keyhole Arc Welding Process

This paper addresses the development of an adaptive control system for keyhole arc welding process. The system developed adjusts the amperage of the peak current to achieve the desired peak current period under varying manufacturing conditions. A nominal model is selected from models identified using experimental data and is used as the a prior model of the controlled process. A predictive cont...

Thermaltransport Phenomenon of Submerged Arc Welding Process

Original scientific paper In present work, thermal transport considering heat radiation by oval heat source shape and heat transfer of molten moving electrode was presented. In present paper, an analytical solution was presented by aggregating temperature increments caused by applying liquid metal and heat radiation of moving electrode. The assumptions for the study were heat source of temperat...

Monitoring of Arc Welding Process Based on Arc Light Emission