Modeling of Partial Hydrogenation of Polyunsaturated Fatty Acid Methyl Esters in a Trickle Bed Reactor
نویسندگان
چکیده
منابع مشابه
Styrene Biofiltration in a Trickle-Bed Reactor
The biological treatment of styrene waste gas in a trickle–bed filter (TBF) was investigated. The bioreactor consisted of a two-part glass cylinder (ID 150 mm) filled with 25 mm polypropylene Pall rings serving as packing material. The bed height was 1m. Although the laboratory temperature was maintained at 22 °C, the water temperature in the trickle–bed filter was slightly lower (about 18 °C)....
متن کاملImproved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor
Abstract Gas to liquid (GTL) process involves heterogeneous catalytic chemical reactions that convert synthesis gas to hydrocarbons and water vapor. A three phase reactor, called Low temperature Fischer-Tropsch (LTFT) is commonly applied for GTL process. In this reactor the gaseous phase includes the synthesis gas, light hydrocarbons and water vapor, the liquid phase is a mixture of the h...
متن کاملCrystallization Behavior of Fatty Acid Methyl Esters
Biodiesel from most agricultural feedstocks has flow properties that are prone to startup and operability problems during cold weather. Biodiesel from soybean oil is generally a mixture of long-chain fatty acid alkyl esters composed of 0.15–0.20 mass fraction saturated esters (melting point [MP] 0 C) mixed with unsaturated esters (MP \ 0 C). This work investigates the crystallization properties...
متن کاملI Methanol Synthesis in a Trickle Bed Reactor
INTRODUCTION The conversion of synthesis gas to methanol is practiced commercially in gas phase fixed bed reactors over a Cu/Zn/Al,O1 catalyst. However, because of the highly exothermic nature of the synthesis reactions, heat dissipation has been a bottleneck in the reactor design and process configuration. Moreover, coalderived synthesis gas, having a low H,/CO ratio, is not suitable for use i...
متن کاملDEVELOPMENT OF A PELLET SCALE MODEL FOR TRICKLE BED REACTOR USING CFD TECHNIQUES
In this study, a pellet scale model was developed for trickle bed reactor utilizing CFD techniques. Drag coefficients were calculated numerically at different velocities and bulk porosities in the case of single phase flow through the dry bed. The simulation results were then compared with the prediction of Kozeny-Carman (K-C) equation. The results indicated that drag coefficients calculated fr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Journal
سال: 2020
ISSN: 0125-8281
DOI: 10.4186/ej.2020.24.4.195