Modeling of sorption enhanced steam methane reforming in an adiabatic fixed bed reactor
نویسندگان
چکیده
منابع مشابه
CFD modeling and control of a steam methane reforming reactor
This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...
متن کاملCFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor
A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MAT...
متن کاملBiomass steam-reforming in a low throughput fluidized bed reactor
This work presents the results from biomass gasification tests in a low throughput fluidized bed membrane reactor (FBMR) and compares them with two-phase model predictions. The operating temperature was decreased to 550C, while an equimolar steam/cellulose ratio was used. The profiles of kinetics limitation and biomass conversion were analysed when a palladium (Pd) membrane for hydrogen separat...
متن کاملCFD-simulation of membrane reactor for methane steam reforming
A membrane reactor is a reaction system that provides higher productivity and lower separation cost in chemical reaction processes. In this paper, packed bed catalytic membrane reactor with palladium membrane for methane steam reforming was analyzed both experimentally and numerically. The numerical model consists of a full set of partial differential equations derived from conservation of mass...
متن کاملSteady State Operability Characteristics of an Adiabatic Fixed-Bed Reactor for Methanol Dehydration
Operability analysis as one of the most important bridges between process design and process control helps the process designer to investigate the control issues quite early in the design stage. Recently, Vinson and Georgakis suggested a steady state geometrical operability index as a quantitative measure for assessment of process operability. In...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 2012
ISSN: 0009-2509
DOI: 10.1016/j.ces.2012.07.039