Modeling of wear-resistance of electro-spark coatings without lubricant
نویسندگان
چکیده
منابع مشابه
Cumulative damage modeling of solid lubricant coatings that experience wear and interfacial fatigue
bstract Solid lubricating coatings comprise a large segment of tribological materials and under a spherical contact the coating/substrate interface xperiences cyclic shear stress that leads to delamination of the coatings from the substrate and premature failure. The polymeric solid lubricating oating used in this study is an expanded PTFE/epoxy composite. The coatings experience cumulative dam...
متن کامل"tin Coatings for Wear Resistance and Gold-like Decorative Coatings"
Titanium Nitride (TiN) coatings have led the way for providing increased wear resistance and extended life of cutting tools, whether carbide inserts or high-speed steel. Where the earliest applications were for high temperature substrate materials (carbides) and chemical vapor deposition (CVD) was the process of choice, later developments in the physical vapor deposition (PVD) technology, espec...
متن کاملEffect of NiTi Addition on the Wear Resistance of YSZ Coatings
In this study, small fraction of NiTi (5 wt%) was added to Yttria stabilized zirconia (YSZ) top coat to improve it sliding wear resistance. The measurement of width of wear tracks after wear tests under a 15 N load for 100 m sliding distances showed that the width of wear track in NiTi-YSZ coating is shorter than that in YSZ coating which depicts the higher wear resistance of NiTi-YSZ coa...
متن کاملOn the Durability and Wear Resistance of Transparent Superhydrophobic Coatings
Transparent liquid repellent coatings with exceptional wear and abrasion resistance are very demanding to fabricate. The most important reason for this is the fact that majority of the transparent liquid repellent coatings have so far been fabricated by nanoparticle assembly on surfaces in the form of films. These films or coatings demonstrate relatively poor substrate adhesion and rubbing indu...
متن کاملEXPERIMENTAL INVESTIGATIONS OF THE Cu-Mo AND Cu-Ti ELECTRO-SPARK COATINGS MODIFIED BY LASER BEAM
The paper is concerned with determining the influence of the laser treatment process on the properties of electro-spark deposited coatings. The properties were assessed by analyzing the coating microstructure, microhardness, residual stresses and corrosion resistance. The tests were conducted for Mo, Ti and Cu coatings (the anode) which were electro-spark deposited over the C45 steel substrate ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of National Aviation University
سال: 2004
ISSN: 2306-1472,1813-1166
DOI: 10.18372/2306-1472.20.1006