Modeling on mechanical behavior and damage evolution of single-lap bolted composite interference-fit joints under thermal effects
نویسندگان
چکیده
منابع مشابه
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Single-Lap Joints under Quasi-static Loading using XFEM
This paper is concerned with modelling damage and fracture in woven fabric CFRP single-lap bolted joints that fail by net-tension. The approach is based on the assumption that damage (matrix cracking, delamination and fibre tow fracture) initiates and propagates from the hole in a self-similar fashion. A traction-separation law (based on physically meaningful material parameters) is implemented...
متن کاملThermal Effects on the Bearing Behavior of Composite Joints
Thermal effects on the pin-bearing behavior of an IM7/PETI5 composite laminate are studied comprehensively. A hypothesis presents factors influencing a change in pin-bearing strength with a change in temperature for a given joint design. The factors include the change in the state of residual cure stress, the material properties, and the fastener fit with a change in temperature. Experiments ar...
متن کاملAnalytical Modeling of Thermal Resistance in Bolted Joints
An analytical approximate solution is developed for predicting the thermal resistance of bolted joints between two square plates . of the same material but different thicknesses. The plates are assumed to have perfectly flat and smooth surfaces, and they are joined by a bolted connection at the center of the square, forming a concentric annular contact region at the interface. The entire surfac...
متن کاملDamage Evolution in Composite Bonded Joints under Fatigue Loading
The fatigue behaviour of single lap bonded joints under fatigue loading was already investigated and a suitable life prediction model was presented and validated [1-2]. The model is based on the actual damage evolution under fatigue load: a crack initiation followed by its propagation up to a critical length [2, 3]. In the present paper the evolution of fatigue damage in single lap joints is ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Aeronautics
سال: 2021
ISSN: 1000-9361
DOI: 10.1016/j.cja.2020.09.023