Modeling the buckling of rectilinearly orthotropic truncated conical shells
نویسندگان
چکیده
منابع مشابه
The Buckling of Non-Homogeneous Truncated Conical Shells under a Lateral Pressure and Resting on a Winkler Foundation
In this paper, the buckling of non-homogeneous isotropic truncated conical shells under uniform lateral pressure and resting on a Winkler foundation is investigated. The basic relations and governing equations have been obtained for non-homogeneous truncated conical shells. The critical uniform lateral pressures of non-homogeneous isotropic truncated conical shells with or without a Winkler fou...
متن کاملTransverse Sensing of Simply Supported Truncated Conical Shells
Modal signals of transverse sensing of truncated conical shells with simply supported boundary condition at both ends are investigated. The embedded piezoelectric layer on the surface of conical shell is used as sensors and output voltages of them in considered modes are calculated. The Governing sensing signal displacement equations are derived based on the Kirchhoff theory, thin-shell assumpt...
متن کاملInvestigation of Axial to Lateral Load ratio on the Buckling of Thin Orthotropic Cylindrical Shells
Buckling analysis of thin cylindrical shells is very important due to their production process. Usually longitudinal and transversal stiffeners are used to increase the buckling stiffness. In this paper, considering a thin cylindrical shell with longitudinal and transversal ribs subjected to axial force and lateral pressure, the influence of different aspect of axial force to lateral pressure ...
متن کاملanalytical solution for buckling of composite sandwich truncated conical shells subject to combined external pressure and axial compression load
abstract: the present study deals with the buckling analysis of the laminated composite truncated conical sandwich shells with flexible core subjected to combined axial compressive load and external pressure. higher order governing equations of the motion are presented for conical composite sandwich shells, where they are derived from the hamilton principle. then, by the use of improved higher-...
متن کاملOPTIMUM DESIGN OF FILAMENT–WOUND LAMINATED CONICAL SHELLS FOR BUCKLING USING THE PENALTY FUNCTION
Optimum laminate configuration for minimum weight of filament–wound laminated conical shells subject to buckling load constraint is investigated. In the case of a laminated conical shell the thickness and the ply orientation (the design variables) are functions of the shell coordinates, influencing both the buckling load and its weight. These effects complicate the optimization problem consider...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical and Computer Modelling
سال: 2001
ISSN: 0895-7177
DOI: 10.1016/s0895-7177(01)00055-3