Modeling The Microrelief Structure of Ti6Al4V Titanium Alloy Surface After Exposure to Femtosecond Laser Pulses

Fatigue Performance of Medical Ti6Al4V Alloy after Mechanical Surface Treatments

Mechanical surface treatments have a long history in traditional engineering disciplines, such as the automotive or aerospace industries. Today, they are widely applied to metal components to increase the mechanical performance of these. However, their application in the medical field is rather rare. The present study aims to compare the potential of relevant mechanical surface treatments on th...

Formation mechanism of self-organized nanogratings on a titanium surface using femtosecond laser pulses

Characterization of loose powder sintered porous titanium and Ti6Al4V alloy

Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...

Argon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.

The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...

Characteristics of Resistance Spot Welded Ti6Al4V Titanium Alloy Sheets

Ti6Al4V titanium alloy is applied extensively in the aviation, aerospace, jet engine, and marine industries owing to its strength-to-weight ratio, excellent high-temperature properties and corrosion resistance. In order to extend the application range, investigations on welding characteristics of Ti6Al4V alloy using more welding methods are required. In the present study, Ti6Al4V alloy sheets w...