Modeling the Microstructural Evolution During Constrained Sintering
نویسندگان
چکیده
منابع مشابه
Microstructural evolution of mullite during the sintering of kaolin powder compacts
Kaolin particles are usually ̄aky in shape. In the present study, kaolin powder compacts were prepared by applying the diepressing technique. The kaolin ̄akes tend to lie down on the plane which is perpendicular to the die-pressing direction. The powder compact thus shows anisotropic shrinkage after ®ring. A series of phase transformations take place as the kaolin is ®red at elevated temperatur...
متن کاملMicrostructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation
The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...
متن کاملMicrostructural evolution during film growth
Atomic-scale control and manipulation of the microstructure of polycrystalline thin films during kinetically limited low-temperature deposition, crucial for a broad range of industrial applications, has been a leading goal of materials science during the past decades. Here, we review the present understanding of film growth processes—nucleation, coalescence, competitive grain growth, and recrys...
متن کاملmicrostructural evolution of x45crniw189 valve steel during hot deformation
the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...
متن کاملEffect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 2015
ISSN: 0002-7820
DOI: 10.1111/jace.13701