Modeling thermal contact resistance at the finger-object interface
نویسندگان
چکیده
منابع مشابه
Thermal Contact Resistance at a Metal Foam-solid Surface Interface
Accurate information on heat transfer and temperature distribution in metal foams is necessary for design and modeling of thermal-hydraulic systems incorporating metal foams. The analysis of this process requires determination of the effective thermal conductivity as well as the thermal contact resistance (TCR) associated with the interface between the metal foams and adjacent surfaces/layers. ...
متن کاملThermal Contact Resistance of Wavy Surfaces (RESEARCH NOTE)
In this paper, the method of determining thermal contact resistance of wavy surfaces is discussed exactly. For determining the thermal contact resistance of real contacts, a new method has been presented. In this method, assuming a regular sinusoidal surface profile, the real contact area in terms of applied forces has been determined. Then thermal contact resistance has been calculated. Testin...
متن کاملThe influence of interface thermal contact resistance on the heat transfer performance of prestressed Duplex tube
Duplex heat exchanger tubes consist oftwo concentric cylinders assembled in a state ofprestress by shrink fitting. During operation, thermal expansion changes the interface pressure and this can cause a substantial increase in the thermal resistance of the tube. Under certain circumstances, more than one steadystate solution can be obtained. In this paper, the effect of this mechanism on the ax...
متن کاملThermal contact resistance between two nanoparticles
We compute the thermal conductance between two nanoparticles in contact based on the Molecular Dynamics technique. The contact is generated by letting both particles stick together under van der Waals attractions. The thermal conductance is derived from the fluctuation-dissipation theorem and the time fluctuations of the exchanged power. We show that the conductance is proportional to the atoms...
متن کاملThermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber
We have measured the thermal resistance of a 152-nm-diameter carbon nanofiber before and after a platinum layer was deposited on the contacts between the nanofiber and the measurement device. The contact resistance was reduced by the platinum coating for about 9–13% of the total thermal resistance of the nanofiber sample before the platinum coating. At a temperature of 300 K, the axial thermal ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Temperature
سال: 2018
ISSN: 2332-8940,2332-8959
DOI: 10.1080/23328940.2018.1551706