Modelling and simulation of a polluted water pumping process
نویسندگان
چکیده
منابع مشابه
Modelling and simulation of a polluted water pumping process
The objective of this article is to discuss the modeling and simulation of the motion of oil spots in the open sea, and the effect on the pollutant concentration when a polluted water pumping ship follows a pre–assigned trajectory to remove the pollutant. We assume here that the oil spots motion is due to the coupling of diffusion, the transport from the wind, sea currents and pumping process a...
متن کاملModeling, Simulation and Optimization of a Polluted Water Pumping Process in Open Sea
The objective of this article is to find the optimal trajectory of a pumping ship, used to clean oil spots in the open sea, in order to pump the maximum quantity of pollutant on a fixed time period. We use a model previously developed to simulate the evolution of the oil spots concentration due to the coupling of diffusion, transport from the wind, sea currents and pumping process and reaction ...
متن کاملProcess modelling and simulation of a Simple Water Treatment Plant
Abstract: Water treatment plants are likely to experience problems such as the water level both in the filter cells and in the tanks tend to fluctuate widely. These create the potential for partial drainage, overflow, and potential initial turbidity breakthrough at the beginning of the filtration cycles. This paper presents a mathematical model for studying the process behavior of a water treat...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province
اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical and Computer Modelling
سال: 2010
ISSN: 0895-7177
DOI: 10.1016/j.mcm.2009.11.023