Modelling of hydrodynamic cavitation with orifice: Influence of different orifice designs
نویسندگان
چکیده
منابع مشابه
Investigating to Cavitation Behavior of Orifice Tunnel
Strong velocity scale effect on cavitation for orifice tunnels was revealed through comparing the results of model tests in vacuum tanks and that of prototype measurements at construction site. A new formula predicting incipient cavitation number of orifice rings is presented in this paper. The predicted data for the prototype scale are coincident well with the prototype measured one.
متن کاملUnstable Cavitation Behavior in a Circular-Cylindrical Orifice Flow
The cavitation characteristics were experimentally investigated about long circular-cylindrical orifices of various throat lengths including the orifice with a trip wire. Especially, the shedding process of separated vortex cavity was examined in detail with the observation using high-speed photography. The cavitation impact was measured with an accelerometer. As a result, it is found that the ...
متن کاملInfluence of Nozzle Orifice Geometry and Fuel Properties on Flow and Cavitation Characteristics of a Diesel Injector
Cavitation refers to the formation of bubbles in a liquid flow leading to a two-phase mixture of liquid and vapor/gas, when the local pressure drops below the vapor pressure of the fluid. Fundamentally, the liquid to vapor transition can occur by heating the fluid at a constant pressure, known as boiling, or by decreasing the pressure at a constant temperature, which is known as cavitation. Sin...
متن کاملModelling Cavitation in (Elasto)Hydrodynamic Lubrication
In this chapter we will present a derivation of a mathematical model describing how cavitation influences the pressure distribution in a thin lubricant film between two moving surfaces. The main idea in the derivation is to first describe the influence of cavitation on the mass flow and thereafter using a conservation law for the mass. This leads to a nonlinear system with two complementary var...
متن کاملDistortion of Flow Measurement and Cavitation Occurs Due to Orifice Inlet Velocity Profiles
This analysis investigates the distortion of flow measurement and the increase of cavitation along orifice flowmeter. The analysis using the numerical method (CFD) validated the distortion of flow measurement through the inlet velocity profile considering the convergence and grid dependency. Realizable k-e model was selected and y+ was about 50 in this numerical analysis. This analysis also est...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Research and Design
سال: 2018
ISSN: 0263-8762
DOI: 10.1016/j.cherd.2018.06.014