Modelling of pre-stressed piezoelectric structures with inhomogeneous coating
نویسندگان
چکیده
منابع مشابه
Adhesive Characterization in Pre-Stressed Piezoelectric Laminates
Pre-stressed piezoelectric laminates, consisting of one or more metal layers and a piezoelectric material bonded together with an adhesive, have been widely studied over the past few years, both numerically and experimentally. Most of the current research has concentrated on the effect of the metal layers, types and geometry, along with variations in the active layer of the laminate. Historical...
متن کاملReflection of Plane Wave at Traction-Free Surface of a Pre-Stressed Functionally Graded Piezoelectric Material (FGPM) Half-Space
This paper is devoted to study a problem of plane waves reflection at a traction-free surface of a pre-stressed functionally graded piezoelectric material (FGPM). The effects of initial stress and material gradient on the reflection of plane waves are studied in this paper. Secular equation has been derived analytically for the pre-stressed FGPM half-space and used to show the existence of two ...
متن کاملPre-stressed Curved Actuators: Characterization and Modeling of their Piezoelectric Behavior
Pre-stressed curved actuators consist of a piezoelectric ceramic (lead zirconate titanate or PZT) sandwiched between various substrates and other top layers. The substrates used in this study are stainless steel, and fiberglass. The top layers are made up of aluminum and carbon. Due to their enhanced strain capabilities, these pre-stressed piezoelectric devices are of interest in a variety of a...
متن کاملStudying the effects of temperature on energy harvesting using pre- stressed piezoelectric diaphragms
Energy harvesting is a process in which energy which would otherwise be wasted is captured, stored and then used to power a system. Devices having such capabilities enjoy an extended life particularly advantageous in systems with limited accessibility, such as biomedical implants and structure embedded micro and wireless sensors. A viable family of materials for this purpose is piezoelectric ma...
متن کاملPiezoelectric sensing coating for real time impact detection and location on aircraft structures
Flexible, light weight and low cost electroactive coating has been fabricated by the dispersion of inorganic ferroelectric submicron particles in a polyurethane matrix. BaTiO3 particles have a mean diameter of 300 nm. The poling process and the influence of volume fraction of BaTiO3 on the piezoelectric activity of the coating have been reported. This spray coating has been realized on 1.6× 1.6...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.09.491