Modelling profile and shape evolution during hot rolling of steel strip
نویسندگان
چکیده
منابع مشابه
Optimum Work Roll Profile Selection in the Hot Rolling of Wide Steel Strip Using Computational Intelligence
The finishing train of a hot strip mill has been modelled by using a constant volume element model. The accuracy of the model has been increased by using an Artificial Neural Network (ANN). A non-linear Rank Based Genetic Algorithm has been developed for the optimization of the work roll profiles in the finishing stands of the simulated hot strip mill. It has been compared with eight other expe...
متن کاملMicrostructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation
The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...
متن کاملMetallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...
متن کاملPrediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The short beam theory based on ela...
متن کاملEffect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling
Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista de Metalurgia
سال: 2006
ISSN: 1988-4222,0034-8570
DOI: 10.3989/revmetalm.2006.v42.i5.35