Modification of rock mass rating system: Interbedding of strong and weak rock layers
نویسندگان
چکیده
منابع مشابه
evaluation of rock mass deformability
One of the most important effective parameters in design of engineering structures is deformability of rock mass. Benchmark of rock mass deformability is the deformation modulus that directly or indirectly obtained. Since the determination of rock mass deformation modulus indirect method by in-situ tests is time-consuming, costly and difficult from executive operations aspect, so it’s correctly...
متن کاملEvaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2)
Successful application of a TBM in a project requires investigating both the ground conditions and the machine and backup system design features. Prediction of the machine performance is very important as it has a big effect on the duration of the project and the costs. In this respect, both penetration rate and advance rate must be estimated. Utilization factor, which depends on the type of op...
متن کاملCalculation of tunnel behavior in viscoelastic rock mass
Wall displacements and ground pressure acting on the lining of a tunnel increase with time. These time-dependent deformations are both due to face advance effect and to the time-dependent behavior of the rock mass. Viscoelastic materials exhibit both viscous and elastic behaviors. Thorough this study, the effect of different linear viscoelastic models including Maxwell, Kelvin and Kelvin-Voigt...
متن کاملEffects of Weak Layer Angle and Thickness on the Stability of Rock Slopes
This paper researches two key factors (angle and thickness) of a weak layer in relation to their influencing mechanism on slope stability. It puts forward the sliding surface angle and morphological model criteria for the control of rock slopes and realization of its failure mechanism. By comparing the Failure Modes and Safety Factors (Fs) obtained from numerical analysis, the influence pattern...
متن کاملStress Measurement in Rock Mass
Understanding and estimating the rock stress state has become increasingly important as nowadays numerical models are mainly used as rock engineering design tool. The objective in determining rock stresses may, in many cases, be seen as an interactive process. The type of data needed may change, depending on at what stage an underground project is in. Further more, preliminary measurements may ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Rock Mechanics and Geotechnical Engineering
سال: 2017
ISSN: 1674-7755
DOI: 10.1016/j.jrmge.2017.06.002