Modification of surface morphology of Ti6Al4V alloy manufactured by Laser Sintering
نویسندگان
چکیده
منابع مشابه
Laser Surface Modification of Ti6Al4V Implants
To improve the biocompatibility of implants, surface medication is a common practice. Depending on the surface medication process, the physical and/or chemical properties of the surface are altered, keeping the bulk properties same. The flexibility and wide application potential of laser as a surface modification tool gives it certain advantages over the traditional physical and chemical proces...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولClinical Evaluation of Prosthetic Sockets Manufactured By Selective Laser Sintering
A pilot study was undertaken to evaluate the clinical acceptance of prosthetic limb sockets manufactured using solid freeform fabrication (SFF). The fabrication of sockets for amputees is a natural application for SFF. The socket is the part of the prosthetic limb that fits onto the amputee’s residual limb. Each socket is custom manufactured for each individual amputee. Four amputees were succe...
متن کاملSurface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
Additive manufacturing (AM) is a production method that enables the building of porous structures with a controlled geometry. However, there is a limited control over the final surface of the product. Hence, complementary surface engineering strategies are needed. In this work, design of experiments (DoE) was used to customize post AM surface treatment for 3D selective laser melted Ti6Al4V open...
متن کاملMechanism of surface modification of CeO in laser remelted alloy
The microstructures and properties of laser remelted alloy spray coatings were studied by means of wear testing, corrosion testing, microhardness testing, scanning electron microscopy, electron probe microanalysis and transmission electron microscopy. The results show that the wear and corrosion resistance of laser remelted alloy spray coatings is remarkably increased by the addition of CeO . T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Engineering
سال: 2016
ISSN: 2391-5439
DOI: 10.1515/eng-2016-0020