Monitoring a Heatsink Temperature Field Using Raman-Based Distributed Temperature Sensor in a Vacuum and −173 °C Environment

Distributed optical fiber temperature sensor using only anti-Stokes Raman scattering light in a loop configuration

In this paper we demonstrate distributed Raman temperature sensing (RDTS) in a loop scheme employing anti-Stokes light intensity only. Using a single-channel receiver and anti-Stokes traces measured in loop configuration, we implement RDTS with inherent compensation of fiber wavelength-dependent losses, as well as local external perturbations. Experimental results show a signal-to-noise ratio e...

Distributed temperature sensor system based on Raman scattering using correlation-codes

Introduction: Fibre-based distributed temperature sensor (DTS) systems have been intensively studied for several years, because of the advantages they can provide compared to conventional sensors, and to optical fibre multiplexed sensor systems (such as grating-based sensors); most common applications include pipeline monitoring (for oil and gas transportation), oil well monitoring and power ca...

Analysis of distributed temperature sensing based on Raman scattering using OTDR coding and discrete Raman amplification

The behaviour of distributed temperature sensors based on spontaneous Raman scattering and coded OTDR (optical time domain reflectometry) is studied both theoretically and experimentally; in particular a high performance scheme has been implemented using amplitude modulation according to Simplex coding, direct detection and additional use of lumped Raman amplification to further extend the sens...

Reflectometry Based Quasi - distributed High Temperature Sensor

A 600 Degrees C Wireless Multimorph-Based Capacitive MEMS Temperature Sensor for Component Health Monitoring

This paper presents the design and fabrication of a new packaged MEMS capacitive temperature sensor for engine component health-monitoring applications and measurement results above 500-600°C. The multimorphs employed are thermal-SiO2/LPCVD-Si3N4/sputtered-Au beams designed for deflection at these temperatures. The mean initial capacitance of the sensors is 6.441 pF; with a standard deviation o...