Monitoring for Bath Composition and Chemical Species of Complexing Agent in Electroless Nickel-Boron Alloy Plating Bath by FTIR ATR Spectrometry.
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملBath and Deposit Monitoring System for Electroless Nickel Plating Process
Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...
متن کاملCapillary Zone Electrophoresis for Electroless Plating Bath Samples
Capillary zone electrophoresis was used in the analysis of anions and cations in electroless plating bath samples. Examples described in this application note include the analysis of inorganic and organic anions in nickel-plating baths, cations in nickel-iron-cobalt-plating baths and metal-EDTA complexes in plating bath waste. Sample preparation was minimal, consisting merely of diluting the sa...
متن کاملElectroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملStructural Characterization and Mechanical Properties of As-plated and Heat Treated Electroless Ni-B-P Alloy Coatings
The Ni-B-P alloy coatings were made autocatalytically (electroless) using an alkaline plating bath with nickel chloride hexahydrate (NiCl2.6H2O) as the source of nickel ions, sodium borohydride (NaBH4) and sodium hypophosphite (NaH2PO2) as reducing agents and source of boron and phosphorous ions, respectively. The effects of bath concentrations on the plating rate, composition of coating, surfa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Circuit Technology
سال: 1994
ISSN: 1884-118X,0914-8299
DOI: 10.5104/jiep1986.9.435