Monitoring of Localized Corrosion with Spontaneous Corrosion Potential Measurements

Uh-1 Corrosion Monitoring

Potential monitoring system for corrosion of steel in concrete

Corrosion of steel in concrete reduces the life and durability of concrete structures. It is a worldwide problem, which causes heavy losses to the economy and industry. The corrosion of steel is inevitable. The durability of concrete structures primarily depends on the condition of the embedded steel in concrete, apart from any deterioration that the concrete may undergo. To determine the condi...

Monitoring De La Corrosion En Ligne De La Corrosion En Ligne Non Intrusif Non-intrusive Online Corrosion Monitoring

Corrosion in process industries is becoming bigger issue day by day and is also the most common cause of asset failure / forced shutdown in plants. Failure of a pipeline or vessel can be dangerous & costly and have severe environmental consequences. A typical mode of asset failure is wall thinning to a critical thickness due to erosion or internal & external corrosion. To keep track of corrosio...

Corrosion Monitoring and Thickness Measurement

INTRODUCTION During the last three years my interest in the use of ultrasonics for the detection of corrosion and the measurement of remaining wall thickness has been re-awakened. The method has been extensively used to verify and quantify Magnetic Flux Leakage (MFL) results. Discrepancies between ultrasonic and MFL results have usually been put down to "Another MFL false call." However, having...

A quasi 2-D localized corrosion model

In 1996 Pots has written a two-dimensional (2-D) stochastic algorithm to simulate the morphology of localized attack. The rule based algorithm operates on the assumption that the morphology of corrosion attack depends on the balance of two processes: corrosion (leading to metal loss) and precipitation (leading to metal protection). The rules of the original algorithm were modified to enable sim...