Monitoring power-law creep using the Failure Forecast Method
نویسندگان
چکیده
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Densification of Porous Materials by Power-law Creep
-The densification of a porous intermetallic alloy (Ti-14wt%AI-21wt%Nb) during the final stage of densification has been investigated under various states of stress and compared with the predictions of current models for densification by power-law creep. The experiments generally confirm the model predictions that the densification rate is a sensitive function of the stress state. Experimentall...
متن کاملPower-law creep in near-equiatomic nickel–titanium alloys
The compressive creep behavior of nickel-rich B2–NiTi (with 50–140 lm grain size) was studied over the stress range 3–11 MPa and the temperature range 950–1100 C. The stress exponent (n = 2.7) and activation energy (Q = 155 kJ mol ) are compared with a literature review of NiTi creep studies performed over lower temperature and/or higher stresses. Possible explanations for discrepancies between...
متن کاملPower-Law Adjusted Failure-Time Models
A simple adjustment to parametric failure-time distributions, which allows for much greater flexibility in the shape of the hazard-rate function, is considered. Analytical expressions for the distributions of the power-law adjusted Weibull, gamma, log-gamma, generalized gamma, lognormal and Pareto distributions are given. Most of these allow for bathtub shaped and other multi-modal forms of the...
متن کاملCreep-Fatigue Failure Diagnosis
Failure diagnosis invariably involves consideration of both associated material condition and the results of a mechanical analysis of prior operating history. This Review focuses on these aspects with particular reference to creep-fatigue failure diagnosis. Creep-fatigue cracking can be due to a spectrum of loading conditions ranging from pure cyclic to mainly steady loading with infrequent off...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Sciences
سال: 2018
ISSN: 0020-7403
DOI: 10.1016/j.ijmecsci.2018.02.041