Motion of Solid Grains During Magnetic Field-Assisted Directional Solidification
نویسندگان
چکیده
منابع مشابه
Directional Solidification Microstructure of a Ni-Based Superalloy: Influence of a Weak Transverse Magnetic Field
A Ni-based superalloy CMSX-6 was directionally solidified at various drawing speeds (5–20 μm·s−1) and diameters (4 mm, 12 mm) under a 0.5 T weak transverse magnetic field. The results show that the application of a weak transverse magnetic field significantly modified the solidification microstructure. It was found that if the drawing speed was lower than 10 μm·s−1, the magnetic field caused ex...
متن کاملUltrasonic Sensing of Solid-Liquid Interface during Directional Solidification of Aluminum
This paper presents a newly developed high temperature ultrasonic sensor and its application to in situ observation of aluminum (Al) alloy during solidification and melting in temperature up to 800C. The ultrasonic sensor mainly consists of a conventional piezoelectric transducer, a titanium buffer rod as an acoustic waveguide and an air cooling pipe. The length is approximately 300 mm. This ul...
متن کاملFormation mechanism of axial macrosegregation of primary phases induced by a static magnetic field during directional solidification
Understanding the macrosegregation formed by applying magnetic fields is of high commercial importance. This work investigates how static magnetic fields control the solute and primary phase distributions in four directionally solidified alloys (i.e., Al-Cu, Al-Si, Al-Ni and Zn-Cu alloys). Experimental results demonstrate that significant axial macrosegregation of the solute and primary phases ...
متن کاملEffects of flow on morphological stability during directional solidification
Research involving the interaction of flow with morphological instability during directional solidification of binary alloys is reviewed. In general, flow may arise during the solidification process from thermal and solutal buoyancy, changes in density upon solidification, thermocapillary forces at free boundaries, or external forcing of the system. We focus primarily on the last of these, givi...
متن کاملShear stabilization of morphological instability during directional solidification
A linear stability analysis is performed on the interface formed during the directional solidification of a dilute binary alloy in the presence of a time-periodic flow. In general, the flow is generated by translating the crystal relative to the far-field flow in elliptical orbits parallel to the interface. The presence of this complex, unsteady flow can either stabilize or destabilize the syst...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2018
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-018-1199-6