Mould Filling Ability Characterisation of Cast Aluminium Alloys Using Design of Experiments

Intermetallic Phases Examination in Cast AlSi5Cu1Mg and AlCu4Ni2Mg2 Aluminium Alloys in As-Cast and T6 Condition

A computational design-of-experiments study of hemming processes for automotive aluminium alloys

Hemming is a three-step sheet-folding process utilized in the production of automotive closures. It has a critical impact on the performance and perceived quality of assembled vehicles. Using a two-dimensional finite element model, this paper presents a design-of-experiments (DOE) study of the relationships between important hemming process parameters and hem quality for aluminium alloy AA 6111...

Creep of Aluminium and Aluminium Alloys

This chapter constitutes an introduction to creep and to the creep response of Aluminium and its alloys. Its major goals are: to provide basic information on creep and its mechanisms to give a description of the more extensively used mathematical relations among creep variables (time, stress and temperature) to illustrate the creep response of pure Aluminium and of Al-Mg alloys to provide a syn...

Metallography of Aluminium alloys

This lecture aims at providing a survey of the metallographic techniques available for the examination of aluminium and its alloys. The information must be sufficient to be sure that the students and the users are able to choose the most suitable technique to solve their problems in the examination of samples. The lecture should contain a direct understanding of the main problems in the metallo...

Comparative Analysis on Mould Filling of A413 Aluminium Alloy in Sand and Evaporative Pattern Casting Process Using Virtual Instrumentation

This paper deals with the comparative study on the properties of Aluminium alloy (LM6-12%Si) castings in sand casting and Evaporative pattern casting (EPC) process. Thermocouples are used to measure the temperature of the casting during solidification. Signals from the thermocouples are connected to the DAQ (Data Acquisition Card) 6024E.The software development platform used for this applicatio...