Multi-Material Design in Welding Arc Additive Manufacturing

Vibration Assisted Robotic Hot-wire Gas Tungsten Arc Welding (gtaw) for Additive Manufacturing of Large Metallic Parts

Most of the metal additive manufacturing technologies are focused on high cost and high end applications. There is in need, a low cost additive manufacturing technology suitable for low and high end metallic applications. Robotic automated welding can be considered as an alternative to manufactured large scale metal parts with layer by layer approach. However, many obstacles have to be overcome...

Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing

Cast nickel aluminum bronze (NAB) alloy is widely used for large engineering components in marine applications due to its excellent mechanical properties and corrosion resistance. Casting porosity, as well as coarse microstructure, however, are accompanied by a decrease in mechanical properties of cast NAB components. Although heat treatment, friction stir processing, and fusion welding were im...

Gas tungsten arc welding

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...

Multi-Objective Optimization of Submerged Arc Welding Process

Submerged arc welding (SAW) is an important metal fabrication technology specially applied to join metals of large thickness in a single pass. In order to obtain an efficient joint, several process parameters of SAW need to be studied and precisely selected to improve weld quality. Many methodologies were proposed in the past research to address this issue. However, a good number of past work s...

Hybrid Laser-Arc Welding