Multi-modal sensing using photoactive thin films
نویسندگان
چکیده
منابع مشابه
Enhanced methanol sensing performance of oblique deposited WO3 thin films
Methanol (CH3OH) is a colorless liquid with a mild odor. The wide ranges of applications, toxicity and clinical implications of methanol have made necessary to develop reliable and high-performance methanol sensors. In this paper, WO3 thin films were deposited on SiO2/Si substrates by e-beam evaporation technique under normal and oblique angles and then post-annealed at 500 °C with a flow of ox...
متن کاملPhotoactive Thin Silver Films by Atmospheric Pressure CVD
We report the visible and UV activity of thin silver films. The films are grown using a CVD process employing aqueous-based silver precursors, flame-assisted chemical vapour deposition. This approach overcomes many of the previously encountered limitations to silver deposition by employing an atmospheric pressure process, low-cost and low-toxicity precursors. The resultant films are assessed fo...
متن کاملRoom-Temperature Humidity Sensing Using Graphene Oxide Thin Films
In this article, we report on a room-temperature humidity sensing device using graphene oxide (GO) thin films synthesized by chemical exfoliation. Changes in the device conductivity are measured for varying relative humidity in the experimental chamber. Experiments are carried out for relative humidity varying from 30% to 95%. We observe a difference in the results obtained for low relative hum...
متن کاملFabrication, characterization and investigation of gas sensing properties of MoO3 thin films
In this research, molybdenum oxide (α-MoO3) thin films were coated on glass substrates using spray pyrolysis technique. 0.05 M ammonium heptamolybdate tetrahydrate was used as precursor and deionized water as solvent. The effects of carrier gas pressure, during the spraying of the solution, on the structural, optical, morphological and gas sensing properties of thin films were studied. X-ray di...
متن کاملReducing False Alarms with Multi-modal Sensing
Industrial sensing applications place a premium on costeffectiveness and accuracy. Traditional approaches often use expensive, invasive sensors, because inexpensive sensors suffer from false positive detections. Sensor cost means automation is sparse or avoided when the value of specific sites cannot be justified. In this paper, we show combining different types of sensors can allow low-cost se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Smart Materials and Structures
سال: 2014
ISSN: 0964-1726,1361-665X
DOI: 10.1088/0964-1726/23/8/085011