Multi-objective Optimization Design of Rotor-squeeze Film Damper System Based on Cell Mapping Method
نویسندگان
چکیده
منابع مشابه
Dynamic Analysis of Multi Mass Counter Rotor System with Integral S-shaped Squeeze Film Damper
In order to reduce the mass, the new designs of turbojet engines use rotors working with higher speeds. These rotors are subjected to large unbalance during engine operational conditions. An additional damping might be necessary in order to enable working at rotation speeds higher than the critical ones. In order to achieve this objective, Integral S-shaped Squeeze Film Damper (ISSFD) and Multi...
متن کاملRotor Design of IPMSM Traction Motor Based on Multi- Objective Optimization using BFGS Method and Train Motion Equations
In this paper a multiobjective optimal design method of interior permanent magnet synchronous motor ( IPMSM) for traction applications so as to maximize average torque and to minimize torque ripple has been presented. Based on train motion equations and physical properties of train, desired specifications such as steady state speed, rated output power, acceleration time and rated speed of tract...
متن کاملsolution of security constrained unit commitment problem by a new multi-objective optimization method
چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...
Dynamic Analysis of a Hybrid Squeeze Film Damper Mounted Rub-Impact Rotor-Stator System
An investigation is carried out on the systematic analysis of the dynamic behavior of the hybrid squeeze-film damper HSFD mounted a rotor-bearing system with strongly nonlinear oil-film force and nonlinear rub-impact force in the present study. The dynamic orbits of the system are observed using bifurcation diagrams plotted using the dimensionless rotating speed ratio as control parameters. The...
متن کاملMulti-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method
This paper presents the application of a viscous adjoint method to the multi-objective design optimization of a transonic compressor rotor blade row. The adjoint method requires about twice the computation effort of flow calculation to obtain the complete gradient information for each cost function, regardless of the number of design parameters. NASA Rotor 67 is redesigned to maximize the total...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical Engineering
سال: 2019
ISSN: 0577-6686
DOI: 10.3901/jme.2019.19.068