Multi-objective optimization of cutting parameters in turning using grey relational analysis
نویسندگان
چکیده
منابع مشابه
Multi-objective optimization in Turning of EN31 steel using Taguchi based grey relational analysis
Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...
متن کاملOptimization of Cutting Parameters in High Speed Turning by Grey Relational Analysis
Medium Carbon Steel AISI 1045 has a wide variety of applications in vehicle component parts & machine building industry. Surface roughness and Material Removal Rate are the main quality functions in high speed turning of medium carbon steel in dry conditions. In this study, the optimization of two response parameters (Surface roughness and Material Removal Rate) by three machining parameters (c...
متن کاملOptimizing turning operation of St37 steel using grey relational analysis
Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملMulti-objective Optimization of Edm Parameters Using Grey Relation Analysis
This paper involves the multi-objective optimization of process parameters of AlSi10Mg/9 wt% alumina/3 wt% graphite in Electrical Discharge Machining for obtaining minimum surface roughness, minimum tool wear rate and maximum material removal rate. The important machining parameters were selected as peak current, flushing pressure and pulse-on time. Experiments were conducted by selecting diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: international journal of industrial engineering computations
سال: 2013
ISSN: 1923-2926,1923-2934
DOI: 10.5267/j.ijiec.2013.06.001