Multi-objective optimization of machining parameters to minimize surface roughness and power consumption using TOPSIS

Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces

Multi-objective Optimization of Laser Beam Machining Process Parameters

Laser beam machining (LBM) is one of the most widely used thermal energy based non-contact type advance machining process. In recent years, researchers have explored a number of ways to improve the LBM process performance by analyzing different factors that affect the quality characteristics of LBM process such as kerf width, kerf taper, surface finish etc. It is revealed from the literature th...

Hybrid Evolutionary Multi-Objective Optimization of Machining Parameters

Evolutionary multi-objective optimization (EMO) has received significant attention in recent studies in engineering design and analysis due to their flexibility, wide-spread applicability and ability to find multiple trade-off solutions. Optimal machining parameter determination is an important matter for ensuring an efficient working of a machining process. In this paper, we describe the use o...

Using Multi-Objective Optimization to Design Parameters in Electro-Discharge Machining by Wire

Multi-objective optimization Genetic Algorithms Robust Design The following paper describes the main objective to follow the methodology used and proposed to obtain the optimal values of WEDM process operation on the machine Robofil 310 by robust parameter design (RPD) of Dr. G. Taguichi [TAGUCHI, G. 1993], through controllable factors which result in more inferences regarding the problem to no...

Influence of machining parameters on surface roughness and dry friction

Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...