Multi-response Optimization of Wire EDM of Inconel 718 Using a Hybrid Entropy Weighted GRA-TOPSIS Method
نویسندگان
چکیده
The current work demonstrates a novel multi-criteria decision-making (MCDM) technique to optimize the process parameters during wire electric discharge machining of Inconel 718. A hybrid GRA-TOPSIS algorithm using entropy weights is developed processes for maximizing cutting speed and simultaneously minimizing surface roughness flatness error. Experiments were conducted according Taguchi L18 orthogonal array considering pulse on time, off servo voltage, feed rate, electrode types as input parameters. each responses calculated by method. different alternatives ranked technique, an optimum parameter combination found that maximizes outcome. analysis variance (ANOVA) was performed study relative significance performance index. results finally validated performing confirmation tests. weighted method observed improve overall compared conventional TOPSIS. Microstructural analysis, morphological studies, EDS integrity machined under optimal settings.
منابع مشابه
Multiobjective Optimization for Wire Edm of Wc-co Composite Using Gra with Entropy Measurement
Selection of machining conditions for improved performance characteristics has great importance during wire EDM, because numerous control factors contribute during machining. In the present study an attempt has been made to find the optimal machining conditions for multi performance characteristics simultaneously by applying grey relational analysis using entropy measurement for which Taguchi b...
متن کاملsolution of security constrained unit commitment problem by a new multi-objective optimization method
چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...
Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance
This paper demonstrates the effectiveness of optimizing multiple characteristics of electrical discharge machining (EDM) of Inconel 718 using copper electrodes having different shapes via Taguchi method-based Grey analysis. The modified algorithm adopted here is used successfully for both detraining the optimum settings of machining parameters and for combining multiple quality characteristic i...
متن کاملDevelopment of Multi-wire Edm Slicing Method for Silicon Ingot
INSTRUCTIONS The diameter of silicon wafer becomes larger in order to increase the number of chips per one wafer. For such a larger diameter silicon ingot is mainly sliced by using multi-wire method, in which a long thin wire is used with slurry. In this method, several hundreds of wafers could be sliced at the same time. However there are still problems remained, such as large cracks, slurry t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Process integration and optimization for sustainability
سال: 2021
ISSN: ['2509-4246', '2509-4238']
DOI: https://doi.org/10.1007/s41660-021-00202-6