Multi-scale computational modeling of lightweight aluminum-lithium alloys
نویسندگان
چکیده
منابع مشابه
Porosity Development during Heat Treatment of Aluminum-lithium Alloys
The development of a sub-surface layer of porosity during heat treatment has been studied in a variety of A1-Li alloys. Pure binary A1-Li alloys and three commercial materials were heat treated in air, vacuum and hydrogen for various lengths of time. Subsequent metallographic sectioning and polishing revealed the presence of a band of pores in the near-surface region extending approximately 300...
متن کاملMulti-scale computational modeling of developmental biology
MOTIVATION Normal development of multicellular organisms is regulated by a highly complex process in which a set of precursor cells proliferate, differentiate and move, forming over time a functioning tissue. To handle their complexity, developmental systems can be studied over distinct scales. The dynamics of each scale is determined by the collective activity of entities at the scale below it...
متن کاملCharacterization and Depth Profile of Lithium Depletion in Aluminum-lithium Alloys by Ultrasound
Aluminum-Lithium (AI-Li) alloys have been developed as an alternative to conventional aluminum alloys for use in aerospace and other applications where lowweight, high strength materials are required. The use of Al-Li alloys in military and civil air transport continues to increase [1]. The key benefits of AI-Li alloys, when compared to conventional aluminum alloys, are the lower density and hi...
متن کاملMicrostructural Scale Effects on Fatigue of Aluminum Alloys
ABSRACT A comparative study of the surface microstructural changes after fatigue in an ultrafine grained and coarse grained aluminum alloy was performed using orientation imaging microscopy (OIM). The fraction of low angle boundaries with misorientation less than 2.5 ̊ increased for both the coarse and ultrafine grained alloys. A consistent decrease in the fraction of low angle boundaries, with ...
متن کاملCoupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys
In this work, the finite element simulation of dissimilar friction stir welding process is investigated. The welded materials are AA 6061-T6 and AA 7075-T6 aluminum alloys. For this purpose, a 3D coupled thermo-mechanical finite element model is developed according to the Coupled Eulerian-Lagrangian (CEL) method. The CEL method has the advantages of both Lagrangian and Eulerian approaches, whic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Heliyon
سال: 2019
ISSN: 2405-8440
DOI: 10.1016/j.heliyon.2019.e01225