Multi-scale thermal-hydraulics analysis on SCWR fuelqualification test loop
نویسندگان
چکیده
منابع مشابه
Comparative analysis of neutronics/thermal-hydraulics multi-scale coupling for LWR analysis
The aim of the research described in this paper is to perform consistent comparative analyses of two different approaches for coupling of two-scale, two-physics phenomena in reactor core calculations. The physical phenomena of interest are the neutronics and the thermal-hydraulics core behaviors and their interactions, while the spatial scales are the “global” (assembly/channel-wise) and the “l...
متن کاملThermal Hydraulics Design Limits
The following discussion of PWR steady state and transient design limits is extracted from the theses of Carter Shuffler and Jarrod Trant while the BWR discussion is extracted from Paolo Ferroni's thesis (covers steady state only). These limits are a simplified and narrower discussion than the relevant NRC standard review plan you will also be referred to. All materials are directly extracted f...
متن کاملImportance Analysis for Uncertain Thermal-Hydraulics Transient Computations
Results of the codes simulating transients and abnormal conditions in nuclear power plants are inevitably uncertain. In application to thermal-hydraulic calculations by thermal-hydraulics codes, uncertainty importance analysis can be used to quantitatively confirm the results of qualitative phenomena identification and ranking table (PIRT). Several methodologies have been developed to address u...
متن کاملLarge-Scale Simulations on Thermal-Hydraulics in Fuel Bundles of Advanced Nuclear Reactors
In order to predict the water-vapor two-phase flow dynamics in a fuel bundle of an advanced light-water reactor, large-scale numerical simulations were performed using a highly parallel-vector supercomputer, the earth simulator. Although conventional analysis methods such as subchannel codes and system analysis codes need composition equations based on the experimental data, it is difficult to ...
متن کاملAppendix 1 Thermal Hydraulics, Draft for Comment
Several different fuel failure criteria have been used in previously NRC-sponsored SFP accident studies. Benjamin, et. al. used the onset of runaway fuel clad oxidation as the fuel failure criterion in NUREG/CR-0649 [Ref. 1]. This criterion was criticized because clad rupture can occur at a relatively low temperature causing a gap release. The consequences of gap release can be significant if t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SCIENTIA SINICA Physica, Mechanica & Astronomica
سال: 2019
ISSN: 1674-7275
DOI: 10.1360/sspma2018-00234