Multi-wavelength narrow linewidth fiber laser based on distributed feedback fiber lasers
نویسندگان
چکیده
منابع مشابه
Multi-Wavelength Fiber Lasers
Nowadays, multiwavelength lasers are of great interest for telecommunications and sensors multiplexing. These lasers also have a great potential in the fiber-optic test and measurement of WDM components. The requirements for such optical sources are: a high number of channels over large wavelength span, moderate output powers (of the order of 100μW per channel) with good optical signal to noise...
متن کاملNarrow-band generation in random distributed feedback fiber laser.
Narrow-band emission of spectral width down to ~0.05 nm line-width is achieved in the random distributed feedback fiber laser employing narrow-band fiber Bragg grating or fiber Fabry-Perot interferometer filters. The observed line-width is ~10 times less than line-width of other demonstrated up to date random distributed feedback fiber lasers. The random DFB laser with Fabry-Perot interferomete...
متن کاملNarrow-Linewidth Distributed Feedback Channel
We report on the fabrication and characterization of a distributed feedback channel waveguide laser in erbium-doped aluminium oxide on a standard thermally oxidized silicon substrate. Holographically-written surface-relief Bragg gratings have been integrated with the aluminium oxide waveguides via reactive ion etching of a silicon dioxide overlay film. The laser operates at a wavelength of 1545...
متن کاملAll-Fiber Configuration Laser Self-Mixing Doppler Velocimeter Based on Distributed Feedback Fiber Laser
In this paper, a novel velocimeter based on laser self-mixing Doppler technology has been developed for speed measurement. The laser employed in our experiment is a distributed feedback (DFB) fiber laser, which is an all-fiber structure using only one Fiber Bragg Grating to realize optical feedback and wavelength selection. Self-mixing interference for optical velocity sensing is experimentally...
متن کاملDiode-pumped narrow linewidth multi-kW metalized Yb fiber amplifier
We investigate high brightness pumping of a multi-kW Yb fiber amplifier in a bi-directional pumping configuration. Each pump outputs 2 kW in a 200 μm, 0.2 NA multi-mode fiber. Gold-coated specialty gain fibers, with 17 m MFD and 5-dB/meter pump absorption, have been developed. The maximum fiber amplifier output power is 3.1 kW, limited by multi-mode instability, with 90% O-O efficiency 12 GHz ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Photonic Sensors
سال: 2016
ISSN: 1674-9251,2190-7439
DOI: 10.1007/s13320-016-0330-z