Multiband antenna using stacked series array for Ka-Band application
نویسندگان
چکیده
منابع مشابه
Ka Band Transmit Antenna Array
Active antenna arrays working at higher frequencies result in higher packaging densities. The antenna array under consideration operates at about 30 GHz and will be installed in an aircraft. Commercially available power amplifiers at these frequencies have an efficiency of typically 20 %, which results in high amounts of dissipated heat for the required high radiated power. The dissipated power...
متن کاملStacked Patch Mimo Antenna Array for C-band Applications
Microstrip antenna arrays are one of the popular antenna configurations for nowadays wireless communication system. The paper proposes a compact novel design of multiple elements electromagnetically coupled stacked antenna array which operates in Cband. The antenna resonates at 6 GHz and shows bandwidth of 521 MHz with 5.84dBi gain. The proposed antenna shows the ECC to be 0.03 which indicated ...
متن کاملDesign and Analysis of Miniaturized Multiband High Frequency Antenna for K and Ka Band Applications
This paper proposes the design and analysis of co-axial continuous transverse stub multiband antenna (CCTS) for multiple high frequency Applications. Coaxial continuous transverse stub antenna is used to operate on multiple frequency bands with small size and low cost. This proposed antenna consists of two stubs, arranged longitudinally to form a waveguide skeleton like structure. The advantage...
متن کاملMultiband Circularly Polarized Stacked Microstrip Antenna
In this paper, a multiband circularly polarized capacitive coupled stacked microstrip antenna is proposed. The multiband circular polarization (CP) is achieved by corner truncation, embedding slits and inclined slots on a three layered antenna structure. The proposed antenna also shows wideband behavior with an impedance bandwidth of 52.13% in the frequency range of 4.85GHz to 8.27GHz, while 3 ...
متن کاملReflectarray for K/ka-band Terminal Antenna
Different satellite systems have been defined to provide broadband communications and internet access in remote geographical areas in Ka band (20-30 GHz) [1-2], being the up-link at 30 GHz and the down-link at 20 GHz. Costeffective antennas are required for fixed and portable terminals in Ka-band. Conventional reflectors are a preferred option to maintain reduced costs. However, the different r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Electrical Engineering and Informatics
سال: 2019
ISSN: 2302-9285,2089-3191
DOI: 10.11591/eei.v8i3.1519