Multilevel reactor design for methanol synthesis
نویسندگان
چکیده
منابع مشابه
Dynamic Simulation of the Lurgi-type Reactor for Methanol Synthesis
The purpose of this work is to develop a reasonably detailed dynamic model of a Lurgitype industrial methanol synthesis reactor so as to determine important simplifications, to identify application/operating model limits, and to preliminary check the feasibility for the Nonlinear Model Predictive Control (NMPC) methodology. To do so, a Partially Differential Equation (PDE) system is formulated ...
متن کاملI Methanol Synthesis in a Trickle Bed Reactor
INTRODUCTION The conversion of synthesis gas to methanol is practiced commercially in gas phase fixed bed reactors over a Cu/Zn/Al,O1 catalyst. However, because of the highly exothermic nature of the synthesis reactions, heat dissipation has been a bottleneck in the reactor design and process configuration. Moreover, coalderived synthesis gas, having a low H,/CO ratio, is not suitable for use i...
متن کاملTailoring Cu Nanoparticle Catalyst for Methanol Synthesis Using the Spinning Disk Reactor
Cu nanoparticles are known to be very active for methanol (MeOH) synthesis at relatively low temperatures, such that smaller particle sizes yield better MeOH productivity. We aimed to control Cu nanoparticle (NP) size and size distribution for catalysing MeOH synthesis, by using the spinning disk reactor. The spinning disk reactor (SDR), which operates based on shear effect and plug flow in thi...
متن کاملCFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor
A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MAT...
متن کاملCore Loading Design for Bushehr Pressurized Water Reactor
The modified out-in fuel management strategy was applied to the core loading design for the first four cycles of the Bushehr (Iran-1) KWU designed Pressurized Water Reactor (PWR). The minimum peak-to-average power density was chosen as the objective function of the optimization process. Lattice homogenization and group constants generation were performed by using the LEOPARD computer code. For ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemie Ingenieur Technik
سال: 2020
ISSN: 0009-286X,1522-2640
DOI: 10.1002/cite.202055215