Multiphase magnetic systems: Measurement and simulation

Measurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process

Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...

Simulation of magnetic refrigeration systems

measurement and simulation of the magnetic flux density exerted on the abrasive particles in magnetic abrasive finishing (maf)

0

Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics

Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...

Multiphase Flow Measurement in the Gas Industry

Over the last 20 years, a number of multiphase flow measurement techniques have been developed for metering oil (or condensate) / water / gas commingled streams. The available techniques can be characterized as those that operate inline or with partial separation. The inline variety typically consists of several meters or measurements and a central computer to interpret the signals and calculat...