MWCNT-coated alumina micro-platelets for nacre-like biomimetic composites

Optimization of MWCNT – Metal Matrix Composites feedstocks

Micro powder injection moulding-μPIM is a powder injection moulding-PIM variant for microparts/devices. This study is about the optimization and respective production of nanocomposites feedstocks suitable to μPIM process. The optimization of MWCNT content in metal matrix composites-MMC feedstock were performed using torque rheometry until achieve homogeneous feedstocks with suitable flowability...

Amorphous layer around aragonite platelets in nacre.

We reveal that the aragonite CaCO3 platelets in nacre of Haliotis laevigata are covered with a continuous layer of disordered amorphous CaCO3 and that there is no protein interaction with this layer. This finding contradicts classical paradigms of biomineralization, e.g., an epitaxial match between the structural organic matrix and the formed mineral. This finding also highlights the role of ph...

Mechanical properties of aluminium-based metal matrix composites reinforced with -alumina platelets

The tensile properties of an aluminium-based metal matrix composite reinforced with a-alumina platelets were investigated from an experimental and a theoretical point of view. An increase in Young modulus, 0,2% proof stress, flow stress and ultimate tensile strength was observed over the unreinforced metal. These improvements were obtained at the expense of the tensile ductility. The experiment...

Layer-by-layer assembly of nacre-like nanostructured composites with antimicrobial properties.

In a recent report, we have presented the layer-by-layer (LBL) assembly of a biomimetic nanostructured composite from Na(+)-montmorillonite clay nanosheets and poly(diallylmethylammonium chloride) (Tang, Z.; Kotov, N.; Magonov, S.; Ozturk, B. Nat. Mater. 2003, 2, 413). The structure, deformation mechanism, and mechanical properties of the material are very similar to those of natural nacre and ...

Bacterial Cellulose-Based Biomimetic Composites