Nanocellulose-Reinforced Polyurethane for Waterborne Wood Coating
نویسندگان
چکیده
منابع مشابه
Synthesis and Characterization of Anionic Polyurethane Dispersants for Waterborne Paints
Anionic polyurethane dispersants APUDs were used as dispersing agents in formulation of waterborne paints. The APUDs were synthesized by three steps. In the first step, macromonomer diisocyanate having carboxylic acid was prepared by isophorone diisocyanate IPDI, dimethylol propionic acid DMPA in presence of acetone as solvent and dibutyltin dilaurate DBTDL as catalyst. Then, carboxylic polyure...
متن کاملBiopolymer nanocomposite films reinforced with nanocellulose whiskers.
A xylan nanocomposite film with improved strength and barrier properties was prepared by a solution casting using nanocellulose whiskers as a reinforcing agent. The 13C cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) analysis of the spectral data obtained for the NCW/xylan nanocomposite films indicated the signal intensity originating from xylan-cellulose inter...
متن کاملPolyaniline Modified Nanocellulose as Reinforcement of a Shape Memory Polyurethane
In this work, electrically conductive cellulose nanocrystals were used to reinforce shape memory polyurethanes, adding an extra variable to tune up the properties of these nanocomposites. The modified nanocrystals were prepared by an in situ polymerization method, growing polyaniline (PANI) on the surface of the cellulose nanofibrils [3]. These crystals combine the good mechanical properties of...
متن کاملCoating Acetylated Wood
Wood exposed to the outdoor environment is susceptible to weathering due to a series of chemical, biological and physical processes. Acetylation of wood is known to reduce cell wall moisture content, improve dimensional stability and durability against fungal decay. As a result of these improvements, less stress is created between the coating and the wood surface improving the performance of th...
متن کاملPolyurethane Coatings Reinforced by Halloysite Nanotubes
The pencil hardness of a two-component polyurethane coating was improved by adding halloysite nanotubes to the recipe at a weight fraction of less than 10%. The pencil hardness was around F for the unfilled coating and increased to around 2H upon filling. It was important to silanize the surface of the filler in order to achieve good coupling to the matrix. Sonicating the sample during drying a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Molecules
سال: 2019
ISSN: 1420-3049
DOI: 10.3390/molecules24173151