Nanofibrillation of Wood Pulp Using a High-Speed Blender
نویسندگان
چکیده
منابع مشابه
Switchable ionic liquids enable efficient nanofibrillation of wood pulp
Use of switchable ionic liquid (SIL) pulp offers an efficient and greener technology to produce nanofibers via ultrafine grinding. In this study, we demonstrate that SIL pulp opens up a mechanically efficient route to the nanofibrillation of wood pulp, thus providing both a low cost and chemically benign route to the production of cellulose nanofibers. The degree of fibrillation during the proc...
متن کاملEnzymatic Bleaching of Wood Pulp
The dark colour of kraft pulp after the wood chips have been heated at high temperature with NaOH solution is caused by lignin (a complex phenolic polymer) still attached to the cellulose fibres. Traditionally this pulp is treated with chlorine to bleach the pulp to make it suitable for paper making. Unfortunately this leads to the formation of some potentially toxic chlorophenolic compounds of...
متن کاملHigh-Speed Penternary Inverter Gate Using GNRFET
This paper introduces a new design of penternary inverter gate based on graphene nanoribbon field effect transistor (GNRFET). The penternary logic is one of Multiple-valued logic (MVL) circuits which are the best substitute for binary logic because of its low power-delay product (PDP) resulting from reduced complexity of interconnects and chip area. GNRFET is preferred over Si-MOSFET for circui...
متن کاملElectrochemical Delignification of Wood Pulp Using Polyoxometalate Mediators
It has been found that polyoxometalates (POMs) can act as mediators in the electrochemical oxidation of lignin in pulps. An electrochemical cell, with a Nafion membrane separating the anode and cathode compartments, was used in the delignification experiments. A softwood kraft pulp was placed in the anode compartment with a buffered 0.01M solution of the polyoxometalate Na5[SiVW11O40]. During e...
متن کاملExploring the effects of treatments with carbohydrases to obtain a high-cellulose content pulp from a non-wood alkaline pulp.
In this work, treatments with a xylanase (X) and carbohydrases mixture (Cx) were applied on a TCF bleached sisal pulp in order to obtain high-cellulose content fibers applicable on a wide range of uses. A limit of ≈12% w/w final content in hemicelluloses was found regardless of the enzymatic treatment assessed. An extraction with 4% and 9% w/v NaOH was performed for further hemicelluloses remov...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biomacromolecules
سال: 2011
ISSN: 1525-7797,1526-4602
DOI: 10.1021/bm101103p