Nanofibrous alumina structures fabricated using high-yield alternating current electrospinning
نویسندگان
چکیده
منابع مشابه
Hybrid nanofibrous membranes of PLGA/chitosan fabricated via an electrospinning array.
Hybrid nanofibrous membranes of poly(lactic-co-glycolic acid) (PLGA) and chitosan with different chitosan amounts (32.3, 62.7, and 86.5%) were fabricated via a specially designed electrospinning setup consisting of two sets of separate syringe pumps and power supplies. After soaking in chloroform overnight to dissolve PLGA, the amount of chitosan in the hybrid membranes was determined. The stru...
متن کاملPoly(lactide-co-glycolide)/hydroxyapatite nanofibrous scaffolds fabricated by electrospinning for bone tissue engineering.
Poly(lactide-co-glycolide) (PLGA) nanofibrous composite scaffolds having nano-hydroxyapatite particles (HAp) in the fibers were prepared by electrospinning of PLGA and HAp with an average diameter of 266.6 ± 7.3 nm. Microscopy and spectroscopy characterizations confirmed integration of the crystalline HAp in the scaffolds. Agglomerates gradually appeared and increased on the fiber surface along...
متن کاملComparing Two Electrospinning Methods in Producing Polyacrylonitrile Nanofibrous Tubular Structures with Enhanced Properties
Polyacrylonitrile nanofibrous tubular structures were produced through typical and opposite charge electrospinning methods and the effect of the method as well as the two key electrospinning parameters, namely concentration of the electrospinning polymer solution and rotational speed of mandrel collector on properties of such tubular structures were studied. The smples were characterized by...
متن کاملNanofibers of cellulose and its derivatives fabricated using direct electrospinning.
A short review with 49 references describes the electrospinninng (ES) process for polysaccharides, cellulose and chitosan, and their derivatives, including cellulose acetate and hydroxypropyl cellulose. A majority of applied studies adopted a two step-process, in which the cellulose acetate was used for the first ES process, followed by acetyl group removal to regenerate cellulose thin fibers. ...
متن کاملMagnesium Ferrite (MgFe2O4) Nanostructures Fabricated by Electrospinning
Magnesium ferrite (MgFe(2)O(4)) nanostructures were successfully fabricated by electrospinning method. X-ray diffraction, FT-IR, scanning electron microscopy, and transmission electron microscopy revealed that calcination of the as-spun MgFe(2)O(4)/poly(vinyl pyrrolidone) (PVP) composite nanofibers at 500-800 degrees C in air for 2 h resulted in well-developed spinel MgFe(2)O(4) nanostuctures. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2016
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2016.08.003