Nanograin formation in milled MoO3 powders
نویسندگان
چکیده
منابع مشابه
Milled Rice Fissure Formation Kinetics
Milled rice samples at various moisture contents (MCs) were exposed to air inside a chamber that was equipped with a video camera and monitoring system that enabled observation of fissure formation over a 24‐h exposure duration. The effects of milled rice kernel MC (11%, 12%, 13%, or 14%), cultivar (Bengal, Wells, and CL161), air relative humidity (RH; 10%, 20%, 30%, 45%, 60%, 75%, or 90%), and...
متن کاملUse of heat of adsorption to quantify amorphous content in milled pharmaceutical powders.
Isothermal calorimetry operated in gas perfusion mode (IGPC) is often used to quantify the amorphous content of pharmaceutical powders. Typically, the calibration line is constructed using the heat of crystallisation as the sample is exposed to high levels of a plasticising vapour. However, since the physical form to which the amorphous fraction crystallises may be dependent on the presence of ...
متن کاملInvestigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders
In this study, the effects of mechanical milling and YSZ reinforcing on oxidation behavior of CoNiCrAlY coatings were investigated. Various amounts of YSZ particles (0%, 5%, 10% and 15 wt.%) were mixed with commercial CoNiCrAlY powder and milled for 24 hrs. Then, the mechanically milled and commercial powders were deposited on Inconel 617 substrate using High Velocity Oxygen-Fuel (HVOF) process...
متن کاملHomogeneity of ball milled ceramic powders: Effect of jar shape and milling conditions
This paper contains data and supporting information of and complementary to the research article entitled "Effect of jar shape on high-energy planetary ball milling efficiency: simulations and experiments" (Broseghini et al.,) [1]. Calcium fluoride (CaF2) was ground using two jars of different shape (cylindrical and half-moon) installed on a planetary ball-mill, exploring different operating co...
متن کاملSpark Plasma Co-Sintering of Mechanically Milled Tool Steel and High Speed Steel Powders
Hot work tool steel (AISI H13) and high speed steel (AISI M3:2) powders were successfully co-sintered to produce hybrid tool steels that have properties and microstructures that can be modulated for specific applications. To promote co-sintering, which is made difficult by the various densification kinetics of the two steels, the particle sizes and structures were refined by mechanical milling ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2013
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/45/1/012006